Kabely jsou určeny pro pevný rozvod elektrické energie v obyčejném a vlhkém prostředí v hotelích, nemocnicích, v metru, na letištích atd., k ochraně lidí a technického vybavení budov v případě požáru tam, kde není požadována funkčnost kabelu při požáru. Kabely nejsou odolné vůči UV záření.

Kabely jsou určeny pro pevný rozvod elektrické energie v obyčejném a vlhkém prostředí v hotelích, nemocnicích, v metru, na letištích atd., k ochraně lidí a technického vybavení budov v případě požáru tam, kde není požadována funkčnost kabelu při požáru. Kabely nejsou odolné vůči UV záření.

This cable is intended for the stationary distribution of electrical energy in dry or damp premises. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fire if circuit integrity is not required. The cable releases little heat and smoke under fire. The cable is not UV-resistant.

This cable is intended for the stationary distribution of electrical energy in dry or damp premises. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fire if circuit integrity is not required. The cable releases little heat and smoke under fire. The cable is not UV-resistant.

Kabely jsou určeny pro pevný rozvod elektrické energie v obyčejném a vlhkém prostředí v hotelích, nemocnicích, v metru, na letištích atd., k ochraně lidí a technického vybavení budov v případě požáru tam, kde je požadavek na zachování funkčnosti kabelu při požáru. Kabely nejsou odolné vůči UV záření.

Kabely jsou určeny pro pevný rozvod elektrické energie v obyčejném a vlhkém prostředí v hotelích, nemocnicích, v metru, na letištích atd., k ochraně lidí a technického vybavení budov v případě požáru tam, kde je požadavek na zachování funkčnosti kabelu při požáru. Kabely nejsou odolné vůči UV záření.

This cable is intended for the stationary distribution of electrical energy in dry or damp premises. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fire if circuit integrity is required (circuit integrity is only maintained if these cables are installed with specified supporting elements). The cable releases little heat and smoke under fire. The cable is not UV-resistant.

Kabely jsou určeny pro pevný rozvod elektrické energie v obyčejném a vlhkém prostředí v hotelích, nemocnicích, v metru, na letištích atd., k ochraně lidí a technického vybavení budov v případě požáru tam, kde je požadavek na zachování funkčnosti celé kabelové instalace při požáru. Kabel v případě požáru uvolňuje malé množství tepla a kouře a navíc z něj neodkapávají žádné hořící částice. Funkčnost celé kabelové instalace v případě požáru je zaručena pouze při použití předepsaných nosných prvků a kabelových spojek. Kabely nejsou odolné vůči UV záření.

This cable is intended for the transmission of analog and digital data in premises where there is an increased risk of fire and a great concentration of people, if circuit integrity is not required. The cable releases little heat and smoke under fire. The cable is not UV-resistant.

This cable is intended for the stationary distribution of electrical energy and can be used in enviroments according to the External influences table below as long as the ends of the cable are thoroughly secured against the ingress of water and moisture and its sheath remains undamaged during installation and operation. The terminal equipment into which the cable is connected (e.g. distribution boxes, switchboards, couplers etc.) must comply with at least the same operating environment requirements as the cable itself. The cable is intended for fixed, universal installation – outside in air (the cable is not self-supporting) or underground, but also inside buildings such as hotels, hospitals, underground railways, airports and in other places where there is an increased concentration of people, etc. to protect people and technical building equipment in the event of fire if circuit integrity is not required. The cable releases little heat and smoke under fire. The cable is UV-resistant.

This cable is intended for the transmission of analog and digital data in premises where there is an increased risk of fire and a great concentration of people, if circuit integrity is required (circuit integrity is only maintained if these cables are installed with specified supporting elements). The cable releases little heat and smoke under fire. The cable is not UV-resistant.

As installation cable for fixed installation over, on, in and under plaster, in dry, damp and wet premises and in masonry and also in the open air but not for direct burial. Since they are free from halogens and exhibit enhanced fire performance, these cables are used in those applications where in the event of fire, the negative effects on concentrations of people and valuable material goods must be minimised.

These cables are intended for the stationary distribution of electrical energy in dry or damp premises and for fixed installations in air or concrete. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fi re if circuit integrity is not required. Not allowed for installations underground or in water.

These cables are intended for the stationary distribution of electrical energy in dry or damp premises and for fixed installations in air or concrete. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fi re if circuit integrity is not required. Not allowed for installations underground or in water.

These cables are intended for the stationary distribution of electrical energy in dry or damp premises and for fixed installations underground, in open air or in concrete. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fire if circuit integrity is not required. Not allowed for installations in water.

These cables are intended for the stationary distribution of electrical energy in dry or damp premises and for fixed installations underground, in open air or in concrete. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fire if circuit integrity is not required. Not allowed for installations in water.

Vodiče jsou určeny pro pevnou, nebo pohyblivou instalaci mezi spínacím a ovládacím zařízením.

Vodiče jsou určeny pro pevnou, nebo pohyblivou instalaci mezi spínacím a ovládacím zařízením.

Kabely jsou určeny pro pevnou nebo pohyblivou instalaci mezi spínacím a ovládacím zařízením. Obzvláště vhodné do prostředí, kde jsou kabely vystavovány trvale vyšším teplotám do 180 °C, ale i do prostředí při nízkých teplotách do –50 °C.

For the electrical connection of components of production machines and machine tools. Shows some resistance to all-purpose mineral oil and is not designed for permanent usage in oil baths. The cable is designed for use in buildings to protect people and technical building equipment in the event of fi re if circuit integrity is not required and should be installed with mechanical protection.

For the electrical connection of components of production machines and machine tools if a certain level of electronic screening is required. Shows some resistance to all-purpose mineral oil and is not designed for permanent usage in oil baths. The cable is designed for use in buildings to protect people and technical building equipment in the event of fi re if circuit integrity is not required and should be installed with mechanical protection

Für die Verwendung in öffentlichen Gebäuden, Tunnels, technischen Räumen, wenn defi niertes Brandverhalten, Halogenfreiheit und ein Nagetierschutz gefordert sind.

For fixed installation in interior premises and in the open air and for direct burial in cable ducts and conduits. Since they are free from halogens and exhbit enhanced fi re performance, these cables are used in those applications where in the event of fi re, the negative effect on concentrations of people and valuable material goods must be minimised.

For fixed installation in interior premises and in the open air and for direct burial in cable ducts and conduits. Since they are free from halogens and exhbit enhanced fire performance, these cables are used in those applications where in the event of fire, the negative effect on concentrations of people and valuable material goods must be minimised.

Power distribution cables in power stations, industrial installations and switchgear, as well as in local mains. For fi xed installation in interior premises, cable ducts, in the open air.

For fixed installation in interior premises and in the open air and for direct burial in cable ducts and conduits. Possible for underground installation. Since they are free from halogens and exhbit enhanced fi re performance, these cables are used in those applications where in the event of fi re, the negative effect on concentrations of people and valuable material goods must be minimised. The concentric ceander conductor can be used as PE or PEN conductor and needs not be cut when assembling branch joints.

This cable is intended for the stationary distribution of electrical energy and can be used in enviroments according to the External influences table below as long as the ends of the cable are thoroughly secured against the ingress of water and moisture and its sheath remains undamaged during installation and operation. The terminal equipment into which the cable is connected (e.g. distribution boxes, switchboards, couplers etc.) must comply with at least the same operating environment requirements as the cable itself. The cable is intended for fixed, universal installation – outside in air (the cable is not self-supporting) or underground, but also inside buildings such as hotels, hospitals, underground railways, airports and in other places where there is an increased concentration of people, etc. to protect people and technical building equipment in the event of fire if circuit integrity is required. The cable releases little heat and smoke under fire. The cable is UV-resistant.

This cable is intended for the stationary distribution of electrical energy and can be used in enviroments according to the External influences table below as long as the ends of the cable are thoroughly secured against the ingress of water and moisture and its sheath remains undamaged during installation and operation. The terminal equipment into which the cable is connected (e.g. distribution boxes, switchboards, couplers etc.) must comply with at least the same operating environment requirements as the cable itself. The cable is intended for fixed, universal installation – outside in air (the cable is not self-supporting) or underground, but also inside buildings such as hotels, hospitals, underground railways, airports and in other places where there is an increased concentration of people, etc. to protect people and technical building equipment in the event of fire if circuit integrity is not required. The cable releases little heat and smoke under fire. The cable is UV-resistant.

This cable is intended for the transmission of analog and digital data and can be used in enviroments according to the External influences table below as long as the ends of the cable are thoroughly secured against the ingress of water and moisture and its sheath remains undamaged during installation and operation. The terminal equipment into which the cable is connected (e.g. distribution boxes, switchboards, couplers etc.) must comply with at least the same operating environment requirements as the cable itself. The cable is intended for fixed, universal installation – outside in air (the cable is not self-supporting) or underground, but also inside buildings such as hotels, hospitals, underground railways, airports and in other places where there is an increased concentration of people, etc. to protect people and technical building equipment in the event of fire if circuit integrity is not required. The cable releases little heat and smoke under fire. The cable is UV-resistant.

This cable is intended for the transmission of analog and digital data and can be used in enviroments according to the External influences table below as long as the ends of the cable are thoroughly secured against the ingress of water and moisture and its sheath remains undamaged during installation and operation. The terminal equipment into which the cable is connected (e.g. distribution boxes, switchboards, couplers etc.) must comply with at least the same operating environment requirements as the cable itself. The cable is intended for fixed, universal installation – outside in air (the cable is not self-supporting) or underground, but also inside buildings such as hotels, hospitals, underground railways, airports and in other places where there is an increased concentration of people, etc. to protect people and technical building equipment in the event of fire if circuit integrity is required. The cable releases little heat and smoke under fire. The cable is UV-resistant.

These cables are intended for the stationary distribution of electrical energy in dry or damp premises and for fi xed installations in air or concrete. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fi re if circuit integrity is required (circuit integrity is only maintained if these cables are installed with specifi ed supporting elements). Not allowed for installations underground or in water. These cables are not UV-protected.

These cables are intended for the stationary distribution of electrical energy in dry or damp premises and for fi xed installations in air or concrete. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fi re if circuit integrity is required (circuit integrity is only maintained if these cables are installed with specifi ed supporting elements). Not allowed for installations underground or in water. These cables are not UV-protected (UVprotection available on request only).

These cables are intended for the stationary distribution of electrical energy in dry or damp premises and for fi xed installations in air or concrete. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fi re if circuit integrity is required (circuit integrity is only maintained if these cables are installed with specifi ed supporting elements). Not allowed for installations underground or in water. These cables are not UV-protected.

These cables are intended for the stationary distribution of electrical energy in dry or damp premises and for fi xed installations in air or concrete. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fi re if circuit integrity is required (circuit integrity is only maintained if these cables are installed with specifi ed supporting elements). Not allowed for installations underground or in water. These cables are not UV-protected.

For use in telecommunications installations. Suitable for interior applications in dry and damp premises, as well on or under plaster. Not suitable for power installation purposes and for direct burial. Since they are free from halogens and exhibit enhanced fi re performance these cables are used in those applications where in the event of fi re the negative effects on concentrations of people and valuable material goods must be minimised.

Intended for the use in measurement and control systems in dry or damp premises and for fi xed installations on or under plaster. Suitable for hotels, hospitals, underground railways, airports etc. to protect people and technical building equipment in the event of fi re if circuit integrity is required (circuit integrity is only maintained if these cables are installed with specifi ed supporting elements). Not allowed for installations underground or in water. These cables are not UV-protected.